Fleece Jogger
Elasticated cuff and waist, drawcord to specification
Representative article
Products: 10
Athleisure lives or dies on hand feel and recovery. Both are fabric decisions, and both are confirmed on a physical sample rather than a spec sheet.
Product types
- Joggers
- Lounge Bottoms
- Performance Tops
- Sleeveless
Lounge Pant
Relaxed block, side-seam pockets
Representative article
Performance Hoodie
Brushed-back knit, buyer-specified drawcord and eyelets
Representative article
Sleeveless Hoodie
Cut-away armhole, bound or ribbed finish
Representative article
Specification
These are the fields resolved during development. Where a value depends on your program, we say so rather than publishing a number that would not survive contact with your specification.
- Fabric options
- Single jersey, interlock, French terry, brushed-back fleece, performance poly
- Typical program weight
- 180-320 gsm
- Stretch
- Elastane content and recovery confirmed on a physical development sample
- Construction
- Flatlock or overlock with cover-stitch hems, to specification
- Trims
- Drawcord, tipping, eyelets and elastic to buyer specification
- Colour
- Dyed to an approved lab dip
- Labelling
- Printed or woven labels, heat-transfer neck label option
- Packing
- Folded, polybag, carton pack to buyer instruction
- Minimum quantity
- Discuss with commercial team
- Sampling
- Discuss with commercial team
- Lead time
- Discuss with commercial team
Weights shown are typical ranges for this product class, given for orientation only. Final composition, weight, construction and finish are confirmed against your specification during development.
Decoration routes
Approved as a strike-off or sew-out on the bulk fabric before production, not after.
- Screen print
- Embroidery
- Heat transfer
- Sublimation
- Applied patches
Production samples
Articles produced to buyer specification, shown as construction references.
Development
The first five stages decide most of the cost. After approval, production is execution against a document you have already signed.
- 01
Brief / Tech Pack
We review the specification, reference garment or sketch and come back with the questions that would otherwise surface as a failed first sample.
- 02
Fabric & Trim Review
Materials are matched to the requirement and presented with the commercial consequence of each option attached.
- 03
Commercial Costing
FOB costing is built against the confirmed construction, materials, decoration, packing and quantity.
- 04
Sample Development
Proto and fit samples are produced against the specification, with a written comment sheet at every round.
- 05
Fit / Approval
Fit, measurements, colour and decoration are approved and locked as the reference for bulk.
Applications
One style is enough to see how we work. Send a tech pack, a reference garment or a written requirement and we will come back on construction, materials and FOB costing.
Explore next
Explore next
Uniform & Workwear manufacturing
Garments that have to survive a shift, a wash cycle and a reorder twelve months later looking like the first delivery.
Polos & T-Shirts manufacturing
The highest-volume item in most uniform programs, and the one where collar recovery and colour consistency across reorders decide whether a buyer stays.
Fleece & Sweatshirts manufacturing
Sweatshirts, hoodies and full-zip fleece: the layer that gets worn outside the building, which makes it the most visible garment in the program.
Materials and fabric selection
Construction families, typical program weights, finishes and where each is used.
Quality assurance process
Where inspection happens and what is checked at each stage.
FOB export from Port Qasim
Documentation, packing, carton marking and handover.