Utility Work Jacket
Four-pocket construction, reinforced stress points
Representative article
Products: 07
Softshell, lightweight jackets and vests: the layer with the most components, and the one where a clear tech pack saves the most cost.
Product types
- Softshell Jackets
- Lightweight Jackets
- Fleece Jackets
- Vests
- Work Jackets
Full-Zip Fleece Jacket
Anti-pill face, chin guard, zip pockets
Representative article
Reflective Safety Vest
Hi-vis is a certified product class. Tape configuration is built to the buyer's nominated standard, and the standard must be qualified before AHM quotes it
Representative article
Specification
These are the fields resolved during development. Where a value depends on your program, we say so rather than publishing a number that would not survive contact with your specification.
- Fabric options
- Bonded softshell, polyester taslan, ripstop, polar fleece, quilted lining
- Typical program weight
- 180-400 gsm
- Lining
- Mesh, taffeta, fleece-backed or unlined, to specification
- Zips & hardware
- Buyer-specified brand, gauge, puller and zip garage
- Seams
- Standard, taped or bonded subject to fabric and specification
- Water resistance
- Subject to fabric selection and buyer-approved testing
- Pockets
- Zip, welt or patch, to specification
- Packing
- Folded or hanging, polybag, carton pack to buyer instruction
- Minimum quantity
- Discuss with commercial team
- Sampling
- Discuss with commercial team
Weights shown are typical ranges for this product class, given for orientation only. Final composition, weight, construction and finish are confirmed against your specification during development.
Decoration routes
Approved as a strike-off or sew-out on the bulk fabric before production, not after.
- Embroidery
- Applied patches
- Heat transfer
- Reflective tape
- Woven badges
Production samples
Articles produced to buyer specification, shown as construction references.
Development
The first five stages decide most of the cost. After approval, production is execution against a document you have already signed.
- 01
Brief / Tech Pack
We review the specification, reference garment or sketch and come back with the questions that would otherwise surface as a failed first sample.
- 02
Fabric & Trim Review
Materials are matched to the requirement and presented with the commercial consequence of each option attached.
- 03
Commercial Costing
FOB costing is built against the confirmed construction, materials, decoration, packing and quantity.
- 04
Sample Development
Proto and fit samples are produced against the specification, with a written comment sheet at every round.
- 05
Fit / Approval
Fit, measurements, colour and decoration are approved and locked as the reference for bulk.
Applications
Buyer questions
Outerwear has the most components of any category, so the specification matters most here: shell fabric, lining, zip brand and gauge, pocket configuration, hood, cuff and hem treatment, and any water-resistance requirement. A tech pack with those resolved gets an accurate first quotation rather than a defensive one.
Softshell is a bonded fabric (a wind-resistant face laminated to a fleece or knit backing), so warmth is built into the cloth. A lined jacket uses a separate shell and lining, which allows different weights and finishes but adds construction. Softshell is lighter to make and to ship.
Water resistance depends on the fabric finish and, at higher levels, on seam treatment. We can supply a water-repellent finish and taped or bonded seams where the fabric allows, with performance confirmed by approved testing. We do not state a hydrostatic head figure without a test report.
Not necessarily. Where your program nominates a zip brand we work to it; where it is open, we present options against the requirement. Zip choice on outerwear affects both cost and perceived quality more than most buyers expect.
Folded and polybagged, or hanging, to your packing instruction. Outerwear is bulky, so carton configuration has a real effect on freight cost and is worth confirming before production rather than at dispatch.
One style is enough to see how we work. Send a tech pack, a reference garment or a written requirement and we will come back on construction, materials and FOB costing.
Explore next
Explore next
Uniform & Workwear manufacturing
Garments that have to survive a shift, a wash cycle and a reorder twelve months later looking like the first delivery.
Polos & T-Shirts manufacturing
The highest-volume item in most uniform programs, and the one where collar recovery and colour consistency across reorders decide whether a buyer stays.
Fleece & Sweatshirts manufacturing
Sweatshirts, hoodies and full-zip fleece: the layer that gets worn outside the building, which makes it the most visible garment in the program.
Materials and fabric selection
Construction families, typical program weights, finishes and where each is used.
Quality assurance process
Where inspection happens and what is checked at each stage.
FOB export from Port Qasim
Documentation, packing, carton marking and handover.