Denim Work Shirt
Twin chest pockets, felled seams, buyer-specified closure
Representative article
Products: 09
Weight, weave, sanforisation and wash decide how a denim garment ages. All four are specification decisions taken before the first sample.
Product types
- Denim Shirts
- Denim Jackets
- Denim Bottoms
- Workwear Denim
Denim Utility Jacket
Four-pocket construction, reinforced stress points
Representative article
Denim Work Trouser
Triple-needle seams, bar-tacked pockets
Representative article
Specification
These are the fields resolved during development. Where a value depends on your program, we say so rather than publishing a number that would not survive contact with your specification.
- Fabric options
- Rigid and stretch denim, left-hand and right-hand twill
- Typical program weight
- 8-14 oz
- Wash
- Rinse, stone, enzyme or raw, developed against an approved reference
- Construction
- Chain-stitch or lock-stitch, felled seams, bar-tacked stress points
- Hardware
- Buyer-specified rivets, shank buttons and zips
- Shrinkage
- Confirmed against wash testing at development stage
- Labelling
- Leather or synthetic patch, main, care and size labels
- Packing
- Folded, polybag, carton pack to buyer instruction
- Minimum quantity
- Discuss with commercial team
- Sampling
- Discuss with commercial team
- Lead time
- Discuss with commercial team
Weights shown are typical ranges for this product class, given for orientation only. Final composition, weight, construction and finish are confirmed against your specification during development.
Decoration routes
Approved as a strike-off or sew-out on the bulk fabric before production, not after.
- Embroidery
- Applied patches
- Screen print
- Leather patch
Production samples
Articles produced to buyer specification, shown as construction references.
Development
The first five stages decide most of the cost. After approval, production is execution against a document you have already signed.
- 01
Brief / Tech Pack
We review the specification, reference garment or sketch and come back with the questions that would otherwise surface as a failed first sample.
- 02
Fabric & Trim Review
Materials are matched to the requirement and presented with the commercial consequence of each option attached.
- 03
Commercial Costing
FOB costing is built against the confirmed construction, materials, decoration, packing and quantity.
- 04
Sample Development
Proto and fit samples are produced against the specification, with a written comment sheet at every round.
- 05
Fit / Approval
Fit, measurements, colour and decoration are approved and locked as the reference for bulk.
Applications
One style is enough to see how we work. Send a tech pack, a reference garment or a written requirement and we will come back on construction, materials and FOB costing.
Explore next
Explore next
Uniform & Workwear manufacturing
Garments that have to survive a shift, a wash cycle and a reorder twelve months later looking like the first delivery.
Polos & T-Shirts manufacturing
The highest-volume item in most uniform programs, and the one where collar recovery and colour consistency across reorders decide whether a buyer stays.
Fleece & Sweatshirts manufacturing
Sweatshirts, hoodies and full-zip fleece: the layer that gets worn outside the building, which makes it the most visible garment in the program.
Materials and fabric selection
Construction families, typical program weights, finishes and where each is used.
Quality assurance process
Where inspection happens and what is checked at each stage.
FOB export from Port Qasim
Documentation, packing, carton marking and handover.